Press cots wear reasons and maintenance tips

To extend the service time of ink roller, printing technology experts suggest that the following matters should be kept in mind during the actual operation:

① The pressure regulation of the roller should meet the requirements, and the pressure of the roller should be checked weekly.

When the operator just goes to work, the parameters of the water tank should be checked, and then the water in the tank reaches the water level, the bucket roller is moved, and then the handle on both ends of the bucket roller is closed, and the bucket roller is moved, so that the surface of the metering roller has a layer of uniform water film.

(3) Because the ink roller is a wearing part, the customer should use the free ink roller and water roller for rotation according to the maintenance specifications of the printing press, remove the ink roller for maintenance every month, and recycle the two sets of water and ink roller.

(4) Install, pull and top plate should pay attention to, do not make the plate deformation is too severe or damaged, such as deformation is too severe or damaged, should be replaced immediately.

⑤ Do not mark the drawing line or other marks on the plate.

⑥ Wash the car once per shift and keep the measuring roller clean.

⑦ Pay attention to the cleaning and maintenance of water roller.

⑧ Regular use of roller cleaner for deep cleaning and calcium removal of the roller.

⑨ After maintenance of the removed ink roller with the stain paste, pay attention to keep away from light; Check the bearings at both ends of the disassembled ink roller.

⑩ Pay attention to the temperature requirements of operations and improve the working environment.

Ruian Fengri Cots Co., Ltd. specializes in polyurethane cots, polyurethane cots, press cots, film blowing machine cots, bag making machine cots, mask machine cots and other mechanical cots.